About Us
Is there any requirement for the insertion depth when installing the Cologne ultrasonic flowmeter?
There are clear requirements for the insertion depth of the probe when installing the Cologne ultrasonic flowmeter, and it must be strictly operated according to the specifications. 1 The determination of insertion depth is mainly determined by the diameter of the pipeline, and the larger the diameter, the deeper the insertion depth. Small pipe diameters (such as below DN100) are usually inserted by a few centimeters, while large pipe diameters (such as above DN1000) may need to be inserted by more than ten centimeters or even deeper.
2. Core installation requires that the probe must reach a stable flow velocity area near the center of the pipeline to ensure that the average fluid flow velocity is captured. Insertion too shallow or too deep can cause measurement errors and even damage to the sensor. 3. Specific operating specifications vary depending on the insertion depth of different models, and the installation manual provided by the manufacturer must be strictly followed. Cologne will provide specific insertion depth values, calculation formulas, or installation positioning templates for each model. Special tools should be used for accurate positioning during installation, and signal strength and quality indicators should be used to verify whether the installation position is qualified after installation.
2. Application and characteristics of ultrasonic open channel flowmeter
Ultrasonic open channel flowmeter is mainly used for flow measurement of square culverts in open channels. It is widely used in water conservancy irrigation areas, sewage treatment, industrial and mining enterprise wastewater discharge, water conservancy engineering, agricultural irrigation and other fields. It has the characteristics of accurate measurement, adaptability to complex working conditions, diverse communication methods, flexible power supply, and convenient operation.
. The specific introduction is as follows: Application scenarios in water conservancy irrigation areas: It is widely used in water conservancy irrigation areas, and can accurately measure the real-time water flow of culverts, providing accurate data support for water use scheduling, water resource management, and other aspects of irrigation areas. Sewage treatment: Suitable for measuring the flow of sewage into and out of sewage treatment channels, it can help relevant personnel accurately grasp the inflow and discharge of sewage, and facilitate monitoring and management of the sewage treatment process. Industrial and mining enterprises: It can be used for flow measurement of chemical liquids and wastewater discharge channels in industrial and mining enterprises, which helps enterprises monitor the flow of liquids in the production process, achieve energy conservation, emission reduction, and environmental protection requirements. Water conservancy engineering: In water conservancy engineering, it can be used for flow measurement in places such as flood discharge gates, providing important flow information for flood control and disaster reduction, water resource allocation, etc. Agricultural irrigation: It can accurately measure the flow rate of agricultural irrigation channels, help farmers irrigate reasonably, improve water resource utilization efficiency, and promote sustainable development of agricultural production. Features: Accurate multi-channe
Product List
Contact Us
News Dynamic
Related AD
